This is currently broken on various corner cases and breaks the
"master branch should be good for day to day work" implicit rule,
ongoing work to stabilize this feature will take place on the
no-cursor-move-on-scroll branch until its deemed ready.
This reverts commit 1e38045d70.
Closes#4963
Kakoune now does not touch cursors when scrolling. It checks
if either the buffer or selections has been modified since
last redraw.
Fixes#4124Fixes#2844
Do not rely on timing but wait for Kakoune to redraw which is what
we actually need: Mouse clicks rely on the current display buffer
to resolve the buffer location, so we need to wait for a redraw
to happen with `ui_out`
Commits e49c0fb04 (unmap: fail if the mapping is currently executing,
2023-05-14) 42be0057a (map: fail if key is currently executing,
2023-06-24) fixed potential use-after-free issues. By doing so,
it broke configurations that in practice have not triggered any
crashes [1] [2].
For example with,
set -remove global autocomplete insert
hook global InsertCompletionShow .* %{
map window insert <esc> <c-o>
}
hook global InsertCompletionHide .* %{
unmap window insert <esc> <c-o>
}
The execution of the <esc> mapping triggers InsertCompletionHide fails
at unmapping. This seems legit and I don't see an obvious alternative
way to write it (InsertIdle would not be correct though it would work
in practice).
Fix the regression by allowing map and unmap again while keeping the
mappings alive until they have finished executing.
Applying map/unmap immediately seems like the most obvious semantics.
Alternatively, we could apply them in between key presses.
[1]: <https://github.com/kak-lsp/kak-lsp/issues/689>
[2]: <https://github.com/alexherbo2/auto-pairs.kak/issues/60>
If during execution of a mapping, that same mapping is replaced,
there is undefined behavior because we destroy a mapping that we are
still iterating over.
I have been using this mapping inside my kakrc to re-source the kakrc.
map global user s %{:source "%val{config}/kakrc"<ret>} -docstring 'source "%val{config}/kakrc"'
Now <space>s happens to not trigger undefined behavior because the
mapping stays the same.
However it triggers an assertion added by Commit e49c0fb04 (unmap:
fail if the mapping is currently executing, 2023-05-14), specifically
the destructor of ScopedSetBool that guards mapping execution.
Fix these by banning map of a key that is executing, just like we
did for unmap.
Alternative solution: we could allow mapping (and even unmapping)
keys at any time and keep them alive by moving them into a trash can,
like we do for clients and others.
When a line only contains non-range atoms we can end-up accessing
past the end atom.
Add a test that shows the issue when run with valgrind, it is
unfortunately quite hard to trigger a crash because the invalidly
accessed byte usually leads to the correct code path being taken
(when != DisplayAtom::Range) so we have only 1 in 255 chance of
triggerring a crash.
Fixes#4927
In some cases such as with folding we can end-up with regions
not having any atoms to highlight which can trigger a crash as
we assume display buffers not to be empty
Fixes#4926
When unmapping a key sequence that is currently executing, we continue
executing freed memory which can have weird effects. Let's instead
throw an error if that happens. In future we can support unmap in
this scenario.
Closes#4896
The previous code was assuming it was fine to push_next without
growing, which used to be the case with the previous implementation
because we always have poped the current thread that we try to push.
However now that we use a ring-buffer, m_next_begin == m_next_end can
either mean full, or empty. We solve this by assuming it means empty
and never allowing the buffer to become full, which means we need
to grow after pushing to next if we get full.
Fixes#4859
The macOS CI manges to trigger this race. When it happens the
"c" inserted by the last command is not seen by the test runner.
Let's fix this by adding yet another sleep.
Recent changes for selection-undo added an assertion that triggers
when a mouse-drag overlaps with an insert mode, because both events
record selection history. However this is actually fine. The one
that finishes last concludes the selection edition, while the other
one will be a nop.
The test could be simpler (i.e. not require sleeps) but I figured it
doesn't hurt add this since we don't have any comparable tests.
With overlapping selections, pasting after breaks assumption of
SelectionList::for_each as our changes are no longer happening in
increasing locations.
We hence cannot rely on the ForwardChangeTracker in that case and
have to rely on the more general (and more costly) ranges update logic.
This interacts poorly with paste linewise pastes and we try to preserve
the current behaviour by tracking the last paste position.
Overall, this change really begs for overlapping selections to be
removed, but we will fix them like that for now.
Fixes#4779
Instead of triming only buffer ranges, add a trim_from method to
display line to keep the initial N columns, we know how many columns
are used by non-trimable widgets in DisplaySetup::widget_columns so
we can just pass this.
Also restore the previous logic for face merging
Fixes#4670
Make the column highlighter faces final, and change final logic to
give precedence to the base face when both the base and new face are
final.
Fixes#4669
Always start with full buffer lines and trim the display buffer at
the very end, treat non-range display atoms as non-trimable in that
case and keep track of how many columns are occupied by "widgets"
such as line numbers or flags.
Fixes#4659
This approach is not very elegant as it hooks into the event manager
deep inside the call graph, but solves the exiting issue and is an
okay stop gap solution until a better design comes up.
Fixes#4605
Deleting a buffer resets normal mode on all clients that were
displaing that buffer, but ScopedForceNormalMode that are used
from user mode do not take this possiblity into account on
destruction, which leads to deleting the last normal mode from
the context, ending up with an empty mode stack.
Fixes#3909
As pointed out in [1], when insert mode autocomplete is disabled,
<c-n> could be used to activate insert mode completions temporarily
[2]. This regressed in 6f7c5aed (Do not show custom completions when
autocomplete is off, 2022-01-03). Fix this by enabling completions
on <c-n>/<c-p>. This allows us to remove a special case for explicit
completers.
Alternative behavior (future?): make <c-n> toggle completion like
<c-o>. This can be done today, as suggested by Screwtape on IRC:
map global insert <c-n> %{<c-o><c-n><a-;>:toggle-ctrl-n<ret>}
define-command toggle-ctrl-n %{
hook global InsertCompletionShow .* %{ map window insert <c-n> <c-n> }
hook global InsertCompletionHide .* %{ unmap window insert <c-n> <c-n> }
}
[1] https://github.com/mawww/kakoune/pull/4493#issuecomment-1031189823
[2] <c-n> completion only lives for the lifetime of the completion
menu, whereas <c-o> lasts until you exit insert mode. This means
that autocompletion is much more convenient than <c-n> or <c-x>f,
because those require an explicit completion request for each
path component.
The ThreadedRegexVM implementation does not execute split opcodes as
expected: on split the pending thread is pushed on top of the thread
stack, which means that when multiple splits are executed in a row
(such as with a disjunction with 3 or more branches) the last split
target gets on top of the thread stack and gets executed next (when the
thread from the first split target would be the expected one)
Fixing this in the ThreadedRegexVM would have a performance impact as
we would not be able to use a plain stack for current threads, so the
best solution at the moment is to reverse the order of splits generated
by a disjunction.
Fixes#4519
This will unfortunately break some use case which will require
using wrapper scripts to add the necessary newline. It is however
harder to do the contrary, and it makes a lot of other use case
possible, such as checksuming.
Fixes#3669
As reported in [1], completions provided by "set global completers
option=my_completion" activate insert mode autocompletion, even when
the autocomplete option does not have the insert mode flag.
This happens because InsertCompleter::on_option_changed() calls
InsertCompleter::setup_ifn(), which shows the completion pager.
Fix this by computing whether the completion pager is enabled;
otherwise we can return early from setup_ifn().
The completion pager is enabled if the autocompletion bit is set,
or if the user has requested explicit completion.
[1]: https://github.com/kak-lsp/kak-lsp/issues/585
trim_indent call was incorrect, trim_indent is intended to work
on multi-line strings and trims trailing whitespace as well (could
benefit from a better name).
Fixes#4378
Add support for a third color in face definition that controls
the underline and a 'c' attribute for curly underline (that takes
precedence over 'u' if both are specified)
Allow empty colors to mean default, so that `,,red+u` means the
same as `default,default,red+u`
Fixes#4138
Correctly indentint on "end" keyword seems very hard,
it is simpler to remove it. And we already insert "end"
in ruby-insert-on-new-line hook, so the removal shouldn't
hurt too much.
When a replaced buffer range atom was starting exactly at the
location we wanted to split onto the code would split *after*
that atom instead of before.
Fixes#4052
