As pointed out in [1], when insert mode autocomplete is disabled,
<c-n> could be used to activate insert mode completions temporarily
[2]. This regressed in 6f7c5aed (Do not show custom completions when
autocomplete is off, 2022-01-03). Fix this by enabling completions
on <c-n>/<c-p>. This allows us to remove a special case for explicit
completers.
Alternative behavior (future?): make <c-n> toggle completion like
<c-o>. This can be done today, as suggested by Screwtape on IRC:
map global insert <c-n> %{<c-o><c-n><a-;>:toggle-ctrl-n<ret>}
define-command toggle-ctrl-n %{
hook global InsertCompletionShow .* %{ map window insert <c-n> <c-n> }
hook global InsertCompletionHide .* %{ unmap window insert <c-n> <c-n> }
}
[1] https://github.com/mawww/kakoune/pull/4493#issuecomment-1031189823
[2] <c-n> completion only lives for the lifetime of the completion
menu, whereas <c-o> lasts until you exit insert mode. This means
that autocompletion is much more convenient than <c-n> or <c-x>f,
because those require an explicit completion request for each
path component.
The ThreadedRegexVM implementation does not execute split opcodes as
expected: on split the pending thread is pushed on top of the thread
stack, which means that when multiple splits are executed in a row
(such as with a disjunction with 3 or more branches) the last split
target gets on top of the thread stack and gets executed next (when the
thread from the first split target would be the expected one)
Fixing this in the ThreadedRegexVM would have a performance impact as
we would not be able to use a plain stack for current threads, so the
best solution at the moment is to reverse the order of splits generated
by a disjunction.
Fixes#4519
This will unfortunately break some use case which will require
using wrapper scripts to add the necessary newline. It is however
harder to do the contrary, and it makes a lot of other use case
possible, such as checksuming.
Fixes#3669
As reported in [1], completions provided by "set global completers
option=my_completion" activate insert mode autocompletion, even when
the autocomplete option does not have the insert mode flag.
This happens because InsertCompleter::on_option_changed() calls
InsertCompleter::setup_ifn(), which shows the completion pager.
Fix this by computing whether the completion pager is enabled;
otherwise we can return early from setup_ifn().
The completion pager is enabled if the autocompletion bit is set,
or if the user has requested explicit completion.
[1]: https://github.com/kak-lsp/kak-lsp/issues/585
trim_indent call was incorrect, trim_indent is intended to work
on multi-line strings and trims trailing whitespace as well (could
benefit from a better name).
Fixes#4378
Add support for a third color in face definition that controls
the underline and a 'c' attribute for curly underline (that takes
precedence over 'u' if both are specified)
Allow empty colors to mean default, so that `,,red+u` means the
same as `default,default,red+u`
Fixes#4138
Correctly indentint on "end" keyword seems very hard,
it is simpler to remove it. And we already insert "end"
in ruby-insert-on-new-line hook, so the removal shouldn't
hurt too much.
When a replaced buffer range atom was starting exactly at the
location we wanted to split onto the code would split *after*
that atom instead of before.
Fixes#4052
Triple strings are now distinct from docstrings, triple strings
only preceeded by blanks on the line are considered docstrings.
Avoid highlighting of the closing marker using a lookahead, this
is not fully correct as it will break on a double quote triple
docstring containing a single quote triple string but that seems
improbable enough; if we encounter this in the wild we can split
the two docstring formats into separate regions.
Because no flags were set for regex matching, the regex engine was
assuming that the subject string past-the-end matched a end-of-line.
As the subject string already ended with a \n character, the regex
engine processing of the "past-the-end" position would match '^$'
as ^ matched past the existing \n and $ matched the assumed
end-of-line.
Fixes#3799
Fixes#3489
When there are multiple empty lines between a paragraph and the cursor
(C in the example below), <a-[>p skips over one of them. Prevent the
check for the extra newline from going out of bounds.
```
a paragraph
C after <a-[>p, the first two lines will be selected
```
When a region calls the regex highlighter, it is incorrect to share
the regex cache as it means we can get matches that span multiple
regions.
Fixes#3041
Do not access Buffer::m_changes to find the inserted range, return
it directly from Buffer::insert and Buffer::replace. This fixes a
wrong behaviour where replacing at eof would lose the selected end
of line (as the implementation does not actually replace that end
of line)
The issue is that the `test/regression/2056-assert-on-small-window`
sent JSON UI input without waiting for for the JSON UI to be
initialized.
Closes#3196
First try to break at a whitespace, if that fails (likely because
that last WORD is too long for the wrapping width), then try to
wrap at a 'word' boundary (on a non alphanumeric character).
Fixes#3048
The current implementation is wrong as it crosses basic blocks
boundaries. Doing basic block decomposition of regex is probably
a tad too complex for this single optimization.
Fixes#2711
This commit also introduces a regression in that I decided that the best way to
avoid overly long and confusing names was to rename the current shell-*
switches to script-*, and have the shell command completion be
shell-completion.
renamed script-{completion,candidates} to shell-script-*
Updated docs with new switch names
Added -shell-completion switch to x11-repl and kitty-repl
Final is more granular, it consists of FinalFg (f), FinalBg (g)
and FinalAttr (a) which control if a face's fg, bg, or attributes
fully overwrite the previous face (instead of merging) and if
following faces apply on top of this face or not.
Fixes#2388 if the Whitespace face has the FinalFg flag.
We cannot guarantee after an itersel that selections are going to
still be in ascending order, but we were calling a SelectionList
constructor that was assuming this was the case.
Reference highlighters allow for potential mutual recursion between
highlighters. This is usually fine, but if the recursion happens on
the same buffer range, it means we will recurse infinitely.
Fixes#1920
Change the logic of open line commands so that if a selection lies
on the end of line character of the line from which we open a new
line, that selection does not move.
If we have two clients, A and B, with B's cursor on the eol character
of line L, and A hits `o` while on line L, B's cursor should stay
on the same (logical) line. Previous behaviour would make B's cursor
jump on the newly inserted line.
Various places in Kakoune code used to modify selections so that
cursors would not lie on an end of line. Remove those to increase
Kakoune's consistency and simplicity.
Now that end of lines are highlighted separately, they should not
be handled specially in most commands.
When on an end of line, certain behaviours can be surprising, for
example delete will join the following line (which makes sense, and
is consistent, but hard to predict if we do not know the cursor is
on and end of line).
As Kakoune is moving more and more towards treating end of lines
as any other character, making it clear when the cursor lies on
them seems like a good way to reduce surprise.
Move recording of keys to the input handler itself instead of the
Insert mode so that eventual nested modes (potentially introduced
by <a-;> will get their keys recorded as well).
Fixes#1680
When using an env var that needed the selections in the pipe command line,
say $kak_selection, the selection update code would run, modifying the
selections to adapt to eventual changes. But the rest of the pipe logic
was assuming the selections would not change, leading to bugs.
That means we can now have highlighters active at global, buffer, and
window scope. The add-highlighter and remove-highlighter syntax changed
to take the parent path (scope/group/...) as a mandatory argument,
superseeding the previous -group switch.
That way, insert mode knows when it can restore selections/avoid eol
instead of (wrongly) doing it in the destructor that ends up running
unpredictibly (as the mode is kept alive during its on_key call, even
though it can happen that it is not the active mode anymore at the end
of that call).
Fixes#1580
