OCaml does not have line comments, and as far as I can tell neither
does Coq. Setting it to '' (like markdown and html do) throws an error
that can be handled or displayed instead of inserting the default '#'.
kak-lsp uses these faces to mark errors inside the buffer, instead of the Error
face which is much more jarring, and which does not have an associated warning
face. Since the :spell command marks errors inside the buffer, it's also updated
to use this new face.
Adding these faces to Kakoune makes it more likely that colorschemes will
automatically do the right thing when used with kak-lsp, and makes it possible
to use a subtle appearance (like curly underlines) for in-buffer errors while
keeping Kakoune errors bold and jarring as they should be.
If the session wasn't valid anymore by the time the linter finishes,
writing to "$dir"/fifo would hang forever leaving temporary files in
/tmp/kak-lint.XXX and the process alive. This commit fixes that by
not writing to the fifo if the session was not valid.
throwawayaccount12345-1 Copyright Waiver
I dedicate any and all copyright interest in this software to the
public domain. I make this dedication for the benefit of the public at
large and to the detriment of my heirs and successors. I intend this
dedication to be an overt act of relinquishment in perpetuity of all
present and future rights to this software under copyright law.
The off-by-one was introduced by cd9b1e66 which changed `column-1` to `column`.
The refactoring solves some esoteric quoting errors: I think cases like
unbalanced braces in the bufname and client were not supported.
This commit removes the default prompt value from the `spell-replace`
command.
Currently, running the command after selecting a misspelled word
might not allow the editor to propose alternative spellings because
it completes upon whatever is inserted into the prompt. If the words
returned by `aspell` are too different from the currently misspelled
word, no candidates are shown.
For example, selecting “unanymously” and running `:spell-replace`
will not show any candidates under the current implementation (the
‘y’ probably trips the fuzzy-matcher).
The user develops a habit of clearing the prompt every time, because
that's the only way to make sure all suggestions from `aspell` are
visible, so the editor might as well not have any default value for
`:spell-replace`.
Other scripts uses a dot `.` to separate the seed from the rest of
the template, making that standard across the codebase allows running
cleanup commands like `rm -rf /tmp/kak-*.*`.
This commit is an attempt at mitigating stray processes and temporary
directories, which pile up in the process tree and `$TMPDIR` over time.
To reproduce the issue, run the `lint` command in rapid successions,
or simply run `:lint; lint; lint;` in the prompt (two consecutive
calls are enough to trigger the bug).
The first call creates a `\*lint-ouput*` buffer, bound to a named
pipe that will be populated later on in an asychronous shell
process. It's that same process that runs the linter afterward, and as
soon as it has been spawned, the following call to `:lint` is executed.
Each call to `:lint` overrides the path to the named pipe that was
assigned to `\*lint-output*` by the previous one, resulting in several
asynchronous processes (that write diagnostics to the pipe) hanging
forever — the pipe is never read, and so the process idles.
The command that removes the temporary directory follows the one that
writes to the named pipe, it's never called in the above scenario,
which additionally results in `kak-lint.XXXXXXXX` directories being
left behind in `$TMPDIR`.
(Also) Fixes#3681.
Fixes issue #2377 by removing the ability to escape backticks in backticks in compliance with asciidoc's behaviour. Adjusted hooks.asciidoc, keys.asciidoc, and command-parsing.asciidoc to match accordingly.
`-atomic` becomes `-method replace` and `-method overwrite` is now
supported explicitely instead of only available through the
writemethod option.
Fixes#3827
Remove unnecessary single quotes and whitespaces in %file{}
Do not delete error file before sending to debug buffer
Fix gopls definition error handling and empty sting check
Silence shellcheck warnings
Previously, spelling suggestions were presented with the :menu command,
requiring the user to cycle through wild and fanciful alternatives to get to the
one they wanted. Now, we present suggestions with the :prompt command, which
allows the user to type to filter down the list, and also to customise the
replacement after they've chose it (perhaps to fix capitalisation or add
apostrophe-S).
We also use the mispelled word as the initial content of the prompt. That
filters out the wildest alternatives by default, and allows the user to edit the
original word instead of forcing them to choose from among the suggestions. To
get the full list of suggestions, it's easy enough to just backspace until the
word you want appears in the list.
Add support for the following gopls commands:
- format
- imports
- definition
- references
Thanks krobelus@ and lenormf@ for their review and suggestions.
- some wording changes in included documentation
- find supports multiple starting paths, we don't need to launch it 3 times
- Change the regex that trims the file extension to only trim the last extension
Some additional things I noticed:
- find should use -L to see through symlinks like the autoload processing does.
- find should check the user's autoload directory first, so users can override
Kakoune's built-in documentation.
This makes the somewhat-dubious assumption that every plugin will have uniquely-
named documentation files, instead of automatically putting every plugin's docs
into a namespace. However, plugins already have to deal with flat namespaces for
commands, options, filetypes, etc. so one more shouldn't hurt.
Fixes#2466.
This adds two things I forgot in
9a7d8df4 (Avoid accidentally using environment variables in sh scopes)
Mea culpa, the problem was that I was skipping matches with "filetype"
because that's usually just a hook parameter as in "WinSetOption filetype=.."
rg --pcre2 '\b(?!filetype=)\w+=' rc/
So I missed these two cases where a shell variable is actually called "filetype".
The one in git.kak was not a problem because show_git_cmd_output is only
ever called with sane inputs. However, file.kak does use the filetype
environment variable for many mime types, for example:
filetype=somefiletype\''; echo -debug injection; nop '\' kak /dev/null
Will run the echo since /dev/null has mime type "inode/chardevice"
Similarly to the <semicolon> key, make it easier to write
`:execute-keys` commands by replacing <percent> with `%`.
Highlighters can keep escaping the sign when regular expressions are
not quoted, but built-in scripts that use `%` as an editing primitive
have been modified to use the named key, for clarity.
This commit renames `lint-enable` into `lint-show-diagnostics`,
makes it hidden, and calls it automatically after diagnostics have
been recovered by `:lint-cleaned-selections`.
The `lint-disable` command becomes `lint-hide-diagnostics`.
The concept of "enabling" diagnostics was inherited from the Clang
support script, but in that case it's not clear why calling `:lint`
should do the work but not render it (similarly to `:spell`).
The `lint-show` command was also renamed into a more descriptive
`lint-show-current-line`.
Ranges specified with a +<length> were inconsistent, with +0 meaning
an empty range, while +1 meant a two character long range (first character
+ the following one). Change that to mean a single character.
Fixes#3479
Calling `:lint-buffer` when `lintcmd` is empty results in a temporary
directory being created, but never removed when the underlying linting
code errors out.
Incrementally setting the lint variables triggers multiple refreshes,
including the text jumping as the guttter column is removed and re-
added. This causes the info message to disappear when linting is done
on NormalIdle.
Looks like hyphens and periods are sometimes printed as part of
git-log(1)’s graphing feature; for example, in this repository:
git log --graph 55e7f857
There might legitimately be "|" characters in the message, so
we want to stop at the first one, the one that delimits the message location
from the message text.
Don't ask Kakoune to quote values we know can never contain shell-sensitive
characters, and flatten the kakquote() function to a single line for ease
of copy/pasting.
