Commit 85b78dda (src: Select the data inserted by `!` and `<a-!>`,
merged on 2021-03-06) broke autorestore by making it delete the
restored content. I've been using it for 6 months but never noticed
since I didn't use autorestore
Reproducer:
HOME=$PWD kak -s foo README.asciidoc -e 'exec iUNSAVED-CONTENT'
# In another terminal:
ps aux | awk '/kak -s foo/ {print $2; exit}' | xargs kill -HUP
HOME=$PWD kak -s foo README.asciidoc
Delete the trailing newline instead of the restored content.
While at it, remove some <space> commands from execute-keys, to make
it work on the breaking-cleanups branch which swaps <space> and ",".
Closes#4335
There is a bug that causes `:git show-diff` to fail when using an external diff, for example difftastic.
This change ensures that we don't use an external diff tool when diffing the current buffer.
Commit 5b1f9255 (rc: Use the standard `fail` command to report errors,
2019-11-14) replaced uses of "echo -markup {Error}" with "fail".
This made format-buffer do
echo "eval -client $kak_client %{ fail }" | kak -p $kak_session
Unfortunately "fail" fails in the client spawned by "kak -p" and not
in $kak_client where the user would see the message. Correct this.
While at it, clarify the error message, so users immediately know
that the number is the exit code.
Fixes#3254
*.ini files traditionally use ; but for example the "foot" terminal's
foot.ini uses #. Add a hack to treat ini files as "conf" filetype
if they contain a #-comment (very slim chance of false positives).
This requires to explicitly set comment_line to the default #,
because we set the "ini" filetype earlier.
The wrapper for "git blame" creates flags for each line of the buffer.
It parses the output from git and would send a flag (or a series of
flags) each time the commit to blame for a line differs from the
previous one. For files that were touched by a large number of commits,
this results in a high number of kakoune processes being launched, and
may take some time. This is visible in the session through the flags for
the different commits appearing on the lines one by one, possibly during
several seconds.
To speed up the process, batch flags before passing them to the kak
session. One solution could be to send all flags at once, but this might
delay the appearance of commit info for too long if "git blame" really
takes a long time. The alternative solution retained for this commit
consists in grouping as many flags as we can during one second
(roughly), to pass them to kakoune, and then to move on to the next
flags. This way, a new batch of commit information flags appears every
second or so in the client, until all information is added. This should
be much faster than lauching a kakoune process for each commit
reported by "git blame": tests have shown that blaming a large file in
the Linux repository goes 4.5 times faster when batching flags.
Co-authored-by: Johannes Altmanninger <aclopte@gmail.com>
git-diff-goto-source is specific to diffs produced by Git. This patch
generalizes the logic and moves it to a new diff-jump in diff.kak.
The main differences are:
- diff-jump handles plain file diffs (i.e. without the -r option). These
have no "diff" line. This means that it needs to parse +++/--- instead.
- diff-jump can go to the old file, not just the new one.
- diff-jump allows to override the base directory and the number of
directory components to strip.
git-diff-goto-source was implemented with several nested try/catch
blocks. Implementing the extra features would have added more
nesting, redundancy or hidden options. To avoid that, I ported the
parsing logic to Perl (which git.kak already depends on). Maybe
it's possible to do the same in awk.
Potential concerns:
- We could move diff-jump to a new rc/tools/diff.kak but then it's not
obvious where the "diff" module belongs to.
- Should diff "diff-jump -1" be spelled "diff-jump -p1"?
In future, the diff parser could be reused to implement a vimdiff-style
feature: given a diff and the "old" line number, we can compute the
corresponding "new" line number. Perhaps diff-jump should get a -client
argument.
We want to move git-diff-goto-source from rc/tools/git.kak
to rc/filetype/diff.kak (or should we could create
rc/tools/diff.kak?). Either way, create the diff module so we can
formalize this dependency.
Currently this module only provides highlighters, so require it
wherever we reference them.
Keep the diff-select-{file,hunk} commands outside the module because
people might already use them in git buffers.
adds the ability to press <ret> within a hunk and navigate to the original
source code. This can be useful because one often needs to go back and forth
between the diff and the full source code.
- You can press <ret> anywhere _within_ a hunk i.e. lines that start with
` `, `+`, `-`. You will be taken to the exact line in the source that corresponds
to where you pressed <ret> in the hunk. It actually does not make sense
to press <ret> on a `-` line because that does not exist anymore but
in that case you are taken to a nearby line in the hope this is still useful.
- You can also press <ret> on a range line (lines that
look like @@ ... @@). If you press <ret> on anywhere on a range line e.g.
```
@@ -120,3 +123,4 @@ fn some_function {
```
The code will try to navigate to the section heading "fn some_function {"
Note that the section heading is _not_ necessarily located at the
range line (in the above example the range line is 123).
- You can press <ret> on a +++ line also and you will be taken the first
line of the file
Caveats:
- Navigation to the original source file will be accurate only if any edits to
the original source file have been saved to disk, because otherwise
they will not be detected by the `:git diff` or `:git show` commands
- This feature should work well for most typical uses e.g. `:git diff`, `:git diff HEAD^`
`:git diff <some-sha1>`. In fact this feature should work in all scenarios when
the *current files* on disk are being compared _with_ some arbitrary git revision/staging.
It will be less useful in other scenarios when two arbitrary revisions are being
compared to each other or when you are trying to compare staging to some revision.
For example when you invoke `:git diff --staged` you are trying to compare staging
with HEAD but are navigating to what is currently on disk (which may be different
from staging).
Co-authored-by: Johannes Altmanninger <aclopte@gmail.com>
As per man page eval(1p):
> The eval utility shall construct a command by concatenating arguments together,
> separating each with a `<space>` character. The constructed command shall be
> read and executed by the shell.
When not quoting `$kak_opt_makecmd` in the eval, the variable is split by
newlines and spaces and then joined by spaces to form the command. If there
were newlines in `$kak_opt_makecmd`, the command would be malformed.
To reproduce:
```kak
set-option global makecmd "
echo foo
echo bar"
make a b c
```
Expected output in the `*make*` buffer:
```
foo
bar a b c
```
Actual output:
```
foo echo bar a b c
```
This patch fixes this.
OCaml does not have line comments, and as far as I can tell neither
does Coq. Setting it to '' (like markdown and html do) throws an error
that can be handled or displayed instead of inserting the default '#'.
kak-lsp uses these faces to mark errors inside the buffer, instead of the Error
face which is much more jarring, and which does not have an associated warning
face. Since the :spell command marks errors inside the buffer, it's also updated
to use this new face.
Adding these faces to Kakoune makes it more likely that colorschemes will
automatically do the right thing when used with kak-lsp, and makes it possible
to use a subtle appearance (like curly underlines) for in-buffer errors while
keeping Kakoune errors bold and jarring as they should be.
If the session wasn't valid anymore by the time the linter finishes,
writing to "$dir"/fifo would hang forever leaving temporary files in
/tmp/kak-lint.XXX and the process alive. This commit fixes that by
not writing to the fifo if the session was not valid.
throwawayaccount12345-1 Copyright Waiver
I dedicate any and all copyright interest in this software to the
public domain. I make this dedication for the benefit of the public at
large and to the detriment of my heirs and successors. I intend this
dedication to be an overt act of relinquishment in perpetuity of all
present and future rights to this software under copyright law.
The off-by-one was introduced by cd9b1e66 which changed `column-1` to `column`.
The refactoring solves some esoteric quoting errors: I think cases like
unbalanced braces in the bufname and client were not supported.
This commit removes the default prompt value from the `spell-replace`
command.
Currently, running the command after selecting a misspelled word
might not allow the editor to propose alternative spellings because
it completes upon whatever is inserted into the prompt. If the words
returned by `aspell` are too different from the currently misspelled
word, no candidates are shown.
For example, selecting “unanymously” and running `:spell-replace`
will not show any candidates under the current implementation (the
‘y’ probably trips the fuzzy-matcher).
The user develops a habit of clearing the prompt every time, because
that's the only way to make sure all suggestions from `aspell` are
visible, so the editor might as well not have any default value for
`:spell-replace`.
Other scripts uses a dot `.` to separate the seed from the rest of
the template, making that standard across the codebase allows running
cleanup commands like `rm -rf /tmp/kak-*.*`.
This commit is an attempt at mitigating stray processes and temporary
directories, which pile up in the process tree and `$TMPDIR` over time.
To reproduce the issue, run the `lint` command in rapid successions,
or simply run `:lint; lint; lint;` in the prompt (two consecutive
calls are enough to trigger the bug).
The first call creates a `\*lint-ouput*` buffer, bound to a named
pipe that will be populated later on in an asychronous shell
process. It's that same process that runs the linter afterward, and as
soon as it has been spawned, the following call to `:lint` is executed.
Each call to `:lint` overrides the path to the named pipe that was
assigned to `\*lint-output*` by the previous one, resulting in several
asynchronous processes (that write diagnostics to the pipe) hanging
forever — the pipe is never read, and so the process idles.
The command that removes the temporary directory follows the one that
writes to the named pipe, it's never called in the above scenario,
which additionally results in `kak-lint.XXXXXXXX` directories being
left behind in `$TMPDIR`.
(Also) Fixes#3681.
Fixes issue #2377 by removing the ability to escape backticks in backticks in compliance with asciidoc's behaviour. Adjusted hooks.asciidoc, keys.asciidoc, and command-parsing.asciidoc to match accordingly.
`-atomic` becomes `-method replace` and `-method overwrite` is now
supported explicitely instead of only available through the
writemethod option.
Fixes#3827
Remove unnecessary single quotes and whitespaces in %file{}
Do not delete error file before sending to debug buffer
Fix gopls definition error handling and empty sting check
Silence shellcheck warnings
Previously, spelling suggestions were presented with the :menu command,
requiring the user to cycle through wild and fanciful alternatives to get to the
one they wanted. Now, we present suggestions with the :prompt command, which
allows the user to type to filter down the list, and also to customise the
replacement after they've chose it (perhaps to fix capitalisation or add
apostrophe-S).
We also use the mispelled word as the initial content of the prompt. That
filters out the wildest alternatives by default, and allows the user to edit the
original word instead of forcing them to choose from among the suggestions. To
get the full list of suggestions, it's easy enough to just backspace until the
word you want appears in the list.
Add support for the following gopls commands:
- format
- imports
- definition
- references
Thanks krobelus@ and lenormf@ for their review and suggestions.
- some wording changes in included documentation
- find supports multiple starting paths, we don't need to launch it 3 times
- Change the regex that trims the file extension to only trim the last extension
Some additional things I noticed:
- find should use -L to see through symlinks like the autoload processing does.
- find should check the user's autoload directory first, so users can override
Kakoune's built-in documentation.
This makes the somewhat-dubious assumption that every plugin will have uniquely-
named documentation files, instead of automatically putting every plugin's docs
into a namespace. However, plugins already have to deal with flat namespaces for
commands, options, filetypes, etc. so one more shouldn't hurt.
Fixes#2466.
This adds two things I forgot in
9a7d8df4 (Avoid accidentally using environment variables in sh scopes)
Mea culpa, the problem was that I was skipping matches with "filetype"
because that's usually just a hook parameter as in "WinSetOption filetype=.."
rg --pcre2 '\b(?!filetype=)\w+=' rc/
So I missed these two cases where a shell variable is actually called "filetype".
The one in git.kak was not a problem because show_git_cmd_output is only
ever called with sane inputs. However, file.kak does use the filetype
environment variable for many mime types, for example:
filetype=somefiletype\''; echo -debug injection; nop '\' kak /dev/null
Will run the echo since /dev/null has mime type "inode/chardevice"
Similarly to the <semicolon> key, make it easier to write
`:execute-keys` commands by replacing <percent> with `%`.
Highlighters can keep escaping the sign when regular expressions are
not quoted, but built-in scripts that use `%` as an editing primitive
have been modified to use the named key, for clarity.
This commit renames `lint-enable` into `lint-show-diagnostics`,
makes it hidden, and calls it automatically after diagnostics have
been recovered by `:lint-cleaned-selections`.
The `lint-disable` command becomes `lint-hide-diagnostics`.
The concept of "enabling" diagnostics was inherited from the Clang
support script, but in that case it's not clear why calling `:lint`
should do the work but not render it (similarly to `:spell`).
The `lint-show` command was also renamed into a more descriptive
`lint-show-current-line`.
Ranges specified with a +<length> were inconsistent, with +0 meaning
an empty range, while +1 meant a two character long range (first character
+ the following one). Change that to mean a single character.
Fixes#3479
Calling `:lint-buffer` when `lintcmd` is empty results in a temporary
directory being created, but never removed when the underlying linting
code errors out.
Incrementally setting the lint variables triggers multiple refreshes,
including the text jumping as the guttter column is removed and re-
added. This causes the info message to disappear when linting is done
on NormalIdle.
Looks like hyphens and periods are sometimes printed as part of
git-log(1)’s graphing feature; for example, in this repository:
git log --graph 55e7f857
There might legitimately be "|" characters in the message, so
we want to stop at the first one, the one that delimits the message location
from the message text.
Don't ask Kakoune to quote values we know can never contain shell-sensitive
characters, and flatten the kakquote() function to a single line for ease
of copy/pasting.
Fixes#2302, #3336.
Addresses parts of #3155.
Changes include:
- New `lint-selections` command that only lints the current selections,
and allows a custom lint command.
- New `lint-buffer` command that always lints the whole buffer with
the linter specified in the lintcmd option.
- `lint` alias for `lint-buffer`, for backwards compatibility.
- Errors and warnings are now shown in the Error and Information faces,
not hard-coded red and yellow.
- Error and warning flags now use "!" and "?" symbols respectively,
instead of a unicode block, so they can still be distinguished
in a monochrome colour-scheme or by colour-blind users.
- An error flag on a given line always takes precedence over a warning.
- All messages for the same line are collected into a multi-line message.
- We no longer escape tildes in messages, since that change was added
in commit ae339dc (2016) when we started using `%~~` to quote messages.
We stopped using `%~~` in commit 1a2eecd (2018).
- Anything the linter writes to stderr is logged to the *debug* buffer,
not lost.
- If the linter writes to stderr, an error is shown to the user instead
of the usual error/warning count.
- The `lint_errors` hidden option is replaced by `lint_messages`,
because it contains warnings as well as errors.
- `lint-next-error` renamed to `lint-next-message`,
and `lint-previous-error` renamed to `lint-previous-message`
for the same reason.
- New `lint-next-error` and `lint-previous-error` aliases,
for backwards compatibility.
- `lint-next-message` and `lint-previous-message` show the message
they jump to.
- Where `lint_errors` was a range-specs option, `lint_messages` is a
line-specs option to keep things simpler. This means lint-next-message
and lint-previous-message no longer jump to a specific column.
The first line returned by `aspell` isn't always an identification
string, it can also be an error.
This commit prevents the first line from being ignored in any case,
and allows errors to be reported consistently.
Related to #3330
Adds support for highlighting git-status(1) output in short format
(--short) and with branch name (--branch), including file renames and
commits ahead/behind information.
Using `{\}` in an Awk script results in the following error being printed:
```
awk: cmd. line:18: warning: escape sequence `\}' treated as plain `}'
```
