Because the HTML highlighter was higher up in the hierarchy than the code
highlighter, it took precedence. I fixed it by making it an inline region.
Using my new knowledge of "inline" I was able to remove one line of code.
Fixes#4091
The X11 repl is unique in that it sends the selection (or parameter) with a
new line appended.
This patch removes that new line and thus, brings it into line with the tmux
and kitty versions.
This commit removes the default prompt value from the `spell-replace`
command.
Currently, running the command after selecting a misspelled word
might not allow the editor to propose alternative spellings because
it completes upon whatever is inserted into the prompt. If the words
returned by `aspell` are too different from the currently misspelled
word, no candidates are shown.
For example, selecting “unanymously” and running `:spell-replace`
will not show any candidates under the current implementation (the
‘y’ probably trips the fuzzy-matcher).
The user develops a habit of clearing the prompt every time, because
that's the only way to make sure all suggestions from `aspell` are
visible, so the editor might as well not have any default value for
`:spell-replace`.
If a line contains three slashes directly followed by a new line, the
next line is also erroneously highlighted as a doc comment currently.
Using a lookahead instead fixes this.
tmux-send-text allows sending an argument, when supplied the argument
will be sent to the REPL instead of the current selection.
tmux-send-text also keeps kak focussed, which does not happen in the x11
variant as it uses xdotool to switch window.
this patch allows:
* Passing an argument to x11-send-text, so that value will be sent
instead of the current selection.
* We capture the window id of the current (presumably kak window)
before we use xdotool to switch window. We can therefore switch back to
kak afterwards (which we do)
This highlighter (line 50 of markdown.kak) looks for the filetype
specified by the author at the top of the code fence, e.g.
``` python
print("hello")
```
and highlights the code within using Kakoune's relevant highlighter --
in this case Python.
Some flavours of markdown use curly braces and other characters in the
first line such as the following:
``` {=python}
print("hello")
```
Previously Kakoune recognised `{=python}` but not `{.python}`. The latter
is Pandoc's flavour of markdown. This patch adjusts the regex patterns
to recognise the dot notation as well.
When $1 or ${kak_selection} start with dash, like "-1", the command will fail, because tmux think it's an argument flag.
-- prevent this.
Also the doc (append new line) is no longer valid.
Other scripts uses a dot `.` to separate the seed from the rest of
the template, making that standard across the codebase allows running
cleanup commands like `rm -rf /tmp/kak-*.*`.
This commit is an attempt at mitigating stray processes and temporary
directories, which pile up in the process tree and `$TMPDIR` over time.
To reproduce the issue, run the `lint` command in rapid successions,
or simply run `:lint; lint; lint;` in the prompt (two consecutive
calls are enough to trigger the bug).
The first call creates a `\*lint-ouput*` buffer, bound to a named
pipe that will be populated later on in an asychronous shell
process. It's that same process that runs the linter afterward, and as
soon as it has been spawned, the following call to `:lint` is executed.
Each call to `:lint` overrides the path to the named pipe that was
assigned to `\*lint-output*` by the previous one, resulting in several
asynchronous processes (that write diagnostics to the pipe) hanging
forever — the pipe is never read, and so the process idles.
The command that removes the temporary directory follows the one that
writes to the named pipe, it's never called in the above scenario,
which additionally results in `kak-lint.XXXXXXXX` directories being
left behind in `$TMPDIR`.
(Also) Fixes#3681.
Triple strings are now distinct from docstrings, triple strings
only preceeded by blanks on the line are considered docstrings.
Avoid highlighting of the closing marker using a lookahead, this
is not fully correct as it will break on a double quote triple
docstring containing a single quote triple string but that seems
improbable enough; if we encounter this in the wild we can split
the two docstring formats into separate regions.
This commit prevents the lines following the one that holds the bullet
from being highlighted with the `bullet` face when they're indented:
- The bullet is highlighted properly, so is this sentence
but this line the ones that would follow are not
Fixes#3582
* fix multilines for declarations
* fix names with `-`, which Ninja allows
* fix few cases of `=` operators
* fix reserved keywords in `command = …` right-hand side
Co-authored-by: Frank LENORMAND <1379068+lenormf@users.noreply.github.com>
Now it uses the window id to identify the REPL window. It is stored in
the option x11_repl_id. That way it is possible to have different REPLs
for different buffers or windows.
Fixes issue #2377 by removing the ability to escape backticks in backticks in compliance with asciidoc's behaviour. Adjusted hooks.asciidoc, keys.asciidoc, and command-parsing.asciidoc to match accordingly.
`-atomic` becomes `-method replace` and `-method overwrite` is now
supported explicitely instead of only available through the
writemethod option.
Fixes#3827
This commit allows code blocks to be prefixed with tabulation
characters to be picked up and highlighted by the editor.
Indenting caused by the inclusion of an inline code block into a
list item is also taken into account. However, that might cause false
positives, for example with a hard wrapped list item indented with
an amount of spaces congruent to 4.
Git includes them in commit messages and notes, which is sometimes useful
when adding shell script snippets:
# this is included in the commit message!
Also, in rebase buffers, # only marks a comment if it is the first nonblank
character in a line.
Remove unnecessary single quotes and whitespaces in %file{}
Do not delete error file before sending to debug buffer
Fix gopls definition error handling and empty sting check
Silence shellcheck warnings
Use the custom object match command for copying indentation of blocks,
rather than simply increasing/decreasing indentation when start and end
statements are encountered.
This fixes an issue where a newline added after an already correctly
placed `else` or `fi` would trigger an unnecessary deindent. Tests have
been added to ensure no regression in this behaviour.
Previously, spelling suggestions were presented with the :menu command,
requiring the user to cycle through wild and fanciful alternatives to get to the
one they wanted. Now, we present suggestions with the :prompt command, which
allows the user to type to filter down the list, and also to customise the
replacement after they've chose it (perhaps to fix capitalisation or add
apostrophe-S).
We also use the mispelled word as the initial content of the prompt. That
filters out the wildest alternatives by default, and allows the user to edit the
original word instead of forcing them to choose from among the suggestions. To
get the full list of suggestions, it's easy enough to just backspace until the
word you want appears in the list.
This adds highlighting for
- quoting operators qw, qr, and qx, like `qw< some words >`
- angle brackets after a quoting operator, like `q<string>`
- punctuation as quoting delimiter, like `q|string|`
- POD sections, which start with ^=\w and and with ^=cut
- heredocs; the marker can be a bare word, or a quoted word, like
print <<~ 'EOF'
single quoted heredoc
EOF
Closes#3736
No attempt is made to use different highlighting for interpolated (qq or
"") strings just yet. Recognizing quote boundaries is more important.
This commit makes `:modeline-parse` grab all lines that look like
modelines, and lets the parser deal with invalid formats.
This allows actually printing an error on unsupported modelines
formats, instead of ignoring them upfront.
This commit prevents specially crafted modelines from making the
editor execute arbitrary Kakoune commands.
By using a tabulation character as a separator, commands can be
injected in the value of the options listed in the modeline. For
example:
# kak: tabstop=2;set-option buffer pwned yes
Fixes#3735.
This commit addresses an off-by-one error that selected `modelines`+1
lines when looking for modelines in a buffer.
Note that setting `modelines` to 0 will still select one line.
Fixes#3733.
This fixes serveral shortcomings of the current implementation:
- valid recipt definitions eg
foo bar="quz":
where previously interrupted by justfile/double_string
and therefore they where not highlighted correctly
- global variable assignments where not captured at all
Add support for the following gopls commands:
- format
- imports
- definition
- references
Thanks krobelus@ and lenormf@ for their review and suggestions.
- some wording changes in included documentation
- find supports multiple starting paths, we don't need to launch it 3 times
- Change the regex that trims the file extension to only trim the last extension
Some additional things I noticed:
- find should use -L to see through symlinks like the autoload processing does.
- find should check the user's autoload directory first, so users can override
Kakoune's built-in documentation.
This makes the somewhat-dubious assumption that every plugin will have uniquely-
named documentation files, instead of automatically putting every plugin's docs
into a namespace. However, plugins already have to deal with flat namespaces for
commands, options, filetypes, etc. so one more shouldn't hurt.
Fixes#2466.
This adds two things I forgot in
9a7d8df4 (Avoid accidentally using environment variables in sh scopes)
Mea culpa, the problem was that I was skipping matches with "filetype"
because that's usually just a hook parameter as in "WinSetOption filetype=.."
rg --pcre2 '\b(?!filetype=)\w+=' rc/
So I missed these two cases where a shell variable is actually called "filetype".
The one in git.kak was not a problem because show_git_cmd_output is only
ever called with sane inputs. However, file.kak does use the filetype
environment variable for many mime types, for example:
filetype=somefiletype\''; echo -debug injection; nop '\' kak /dev/null
Will run the echo since /dev/null has mime type "inode/chardevice"
It's unclear what the `send-text` alias does at first glance,
so prefixing it with "repl-" both fixes that and helps make it
discoverable via the command prompt's fuzzy matcher.
The `repl` alias also seems too generic a name, the "-new" suffix
should hopefully give a hint that it creates a new window.
This commit addresses the following issues:
* highlight trailing space characters with the `meta` face, instead of
`PrimarySelection`
* make the regex more readable by using a capture group in stead of
`\K`
* specifically match space characters, not other horizontal whitespace
characters
* match two or more space characters
Reference[1]:
> When you do want to insert a <br /> break tag using Markdown, you
> end a line with two or more spaces, then type return.
[1] https://daringfireball.net/projects/markdown/syntax#p
Note that the original reproducer doesn't seem to work anymore,
probably because of changes made to how lists are highlighted.
Fixes#911
