kakoune/doc/pages/expansions.asciidoc

305 lines
10 KiB
Plaintext
Raw Normal View History

= Expansions
While parsing a command (see <<command-parsing#,`:doc command-parsing`>>),
Kakoune recognises certain patterns and will replace them with their
associated value before executing the command. These patterns are called
expansions.
Every expansion consists of a `%`, followed by the expansion _type_ (one
or more alphabetic characters), a nestable punctuation character (`(`, `[`,
`{`, or `<`), and then all the text up to and including its matching opposite
(`)`, `]`, `}`, or `>`). It doesn't matter which character is used, but
`{}` are most common. For example, the command `echo %val{session}` will
echo the ID of the current Kakoune session.
2018-09-27 07:37:38 +02:00
Expansions are processed when unquoted and anywhere inside double-quoted
strings, but not inside unquoted words, inside single-quoted strings, or
inside %-strings or other expansions. So:
* `echo %val{session}` echoes the current session ID
2018-06-03 22:23:17 +02:00
* `echo x%val{session}x` echoes the literal text `x%val{session}x`
2018-06-03 22:23:17 +02:00
* `echo '%val{session}'` echoes the literal text `%val{session}`
2018-06-03 22:23:17 +02:00
* `echo "x%val{session}x"` echoes the current session ID, surrounded by `x`
2018-06-03 22:23:17 +02:00
2018-09-27 07:37:38 +02:00
* `echo %{%val{session}}"` echoes the the literal text `%val{session}`
* `echo %sh{ echo %val{session} }"` echoes the literal text `%val{session}`
2018-09-27 07:37:38 +02:00
Like "variable expansion" and "command substitution" in shell programming,
Kakoune expansions can expand to multiple "words" - that is, separate
arguments on the resulting command-line. However, unlike shell programming,
Kakoune expansions cannot _accidentally_ expand to multiple words, even if
the expansion contains whitespace or other special characters. While in
shell-programming it's good practice to always wrap expansions in
double-quotes, in Kakoune it's perfectly safe to leave expansions unquoted.
== Argument expansions
Expansions with the type `arg` can only be used inside the "commands" parameter
of the `define-command` command (See <<commands#declaring-new-commands,`:doc
commands declaring-new-commands`>>).
The following expansions are available:
*%arg{n}*::
(where _n_ is a decimal number) +
expands to argument number _n_ of the current command
*%arg{@}*::
2018-09-27 07:37:38 +02:00
expands to all the arguments of the current command, as individual words
== Option expansions
Expansions with the type `opt` expand to the value associated with the named
option in the current scope (See <<options#,`:doc options`>>).
For example, `%opt{BOM}` expands to `utf8` or to `none`, according to the
current state of the `BOM` option.
== Register expansions
Expansions with the type `reg` expand to the contents of the named
register. For registers named after symbols (like the search register
`/`), the expansion can use either the symbol or the alphabetic name (See
<<registers#,`:doc registers`>>).
For example, `%reg{/}` expands to the content of the `/` register, and so does
`%reg{slash}`.
== Shell expansions
Expansions with the type `sh` are executed as shell-scripts, and whatever
the script prints to standard output replaces the expansion. For example,
the command `echo %sh{date}` will echo the output of the `date` command.
TIP: If a shell expansion writes to standard error, that output is appended to
Kakoune's `\*debug*` buffer. If you're trying to debug a shell expansion,
check the debug buffer with `:buffer \*debug*` to see if anything shows up.
Because Kakoune does not expand expansions inside the text of an expansion,
you can't use normal expansions inside `%sh{}`. Instead, Kakoune can export
expansions as environment variables to make them available to the shell.
Here's how expansion patterns map to variable names:
*%arg{n}*::
(where _n_ is a decimal number) +
becomes `$_n_`. For example, `%arg{3}` becomes `$3`.
*%arg{@}*::
becomes `$@`
*%opt{x}*::
becomes `$kak_opt_x`
*%reg{x}*::
(where _x_ is the alphabetic name of a register) +
`$kak_reg_x` contains all the selections in register _x_ +
`$kak_main_reg_x` contains only the main selection
*%val{x}*::
becomes `$kak_x`
When turned into environment variables, list-type options, `$kak_reg_x`, and
"quoted list" values will be shell-quoted so the shell doesn't get confused
about how many items the list contains. You will need to apply `eval` to get
back the original values. For example, if you want to process the contents
of each selection, you can do something like:
----
eval set -- $kak_selections
while [ $# -gt 0 ]; do
2018-09-28 10:00:20 +02:00
# ... do a thing with $1 ...
shift
done
----
The `eval` command will take the expanded `$kak_selections` and unquote them,
then execute the resulting `set` command, which sets the shell's argument
variables to the items from `$kak_selections`. The `while` loop with `shift`
iterates through the arguments one by one.
Only variables actually mentioned in the body of the shell expansion will
be exported into the shell's environment. For example:
----
echo %sh{ env | grep ^kak_ }
----
2018-09-28 10:00:20 +02:00
... will find none of Kakoune's special environment variables, but:
----
2018-09-27 07:37:38 +02:00
echo %sh{ env | grep ^kak_ # kak_session }
----
2018-09-28 10:00:20 +02:00
... will find the `$kak_session` variable because it was mentioned by name
2018-09-27 07:37:38 +02:00
in a comment, even though it wasn't directly used.
TIP: These environment variables are also available in other contexts where
Kakoune uses a shell command, such as the `|`, `!` or `$` normal mode commands
(See <<keys#,`:doc keys`>>).
== Value expansions
2018-09-27 07:37:38 +02:00
Expansions with the type `val` give access to Kakoune internal data that is
not stored in an option or a register. Some value expansions can only be used
in certain contexts, like `%val{hook_param}` that expands to the parameter
string of the currently-executing hook, and is not available outside a hook.
2018-09-27 07:37:38 +02:00
The following expansions are supported (with required context _in italics_):
*%val{buffile}*::
_in buffer, window scope_ +
full path of the file or same as `%val{bufname}` when theres no
associated file
*%val{buf_line_count}*::
_in buffer, window scope_ +
number of lines in the current buffer
*%val{buflist}*::
quoted list of the names of currently-open buffers (as seen in
`%val{bufname}`)
*%val{bufname}*::
_in buffer, window scope_ +
name of the current buffer
*%val{client_env_X}*::
_in window scope_ +
value of the `$X` environment variable in the client displaying the current
window (e.g. `%val{client_env_SHELL}` is `$SHELL` in the client's
environment)
*%val{client_list}*::
unquoted list of the names of clients (as seen in `%val{client}`)
connected to the current session
*%val{client}*::
_in window scope_ +
name of the client displaying the current window
*%val{client_pid}*::
_in window scope_ +
process id of the client displaying the current window
*%val{config}*::
directory containing the user configuration
*%val{count}*::
_in `map` command <keys> parameter_ +
current count when the mapping was triggered, defaults to 0 if no
count given
*%val{cursor_byte_offset}*::
_in window scope_ +
offset of the main cursor from the beginning of the buffer (in bytes)
*%val{cursor_char_column}*::
_in window scope_ +
1-based offset from the start of the line to the cursor position in
Unicode codepoints, which may differ from visible columns if the document
contains full-width codepoints (which occupy two columns) or zero-width
codepoints
*%val{cursor_char_value}*::
_in window scope_ +
unicode value of the codepoint under the main cursor
*%val{cursor_column}*::
_in window scope_ +
1-based offset from the start of the line to the first byte of the
character under the main cursor (in bytes), the fourth component of
`%val{selection_desc}`
*%val{cursor_line}*::
_in window scope_ +
line of the main cursor, the third component of `%val{selection_desc}`
2018-09-20 04:46:52 +02:00
*%val{history_id}*::
_in buffer, window scope_ +
history id of the current buffer, an integer value which refers to a
specific buffer version in the undo tree (see also `%val{timestamp}`)
*%val{hook_param_capture_n}*::
_in `hook` command <command> parameter_ +
text captured by capture group _n_, if the executing hook's filter regex
used capture groups
*%val{hook_param}*::
_in `hook` command <command> parameter_ +
the complete parameter string of the executing hook
*%val{modified}*::
_in buffer, window scope_ +
`true` if the buffer has modifications not saved, otherwise `false`
*%val{register}*::
_in `map` command <keys> parameter_ +
current register when the mapping was triggered
*%val{runtime}*::
directory containing the kak support files, determined from Kakoune's
binary location
*%val{selection}*::
_in window scope_ +
content of the main selection
*%val{selections}*::
_in window scope_ +
quoted list of the contents of all selections
*%val{selection_desc}*::
_in window scope_ +
range of the main selection, represented as `a.b,c.d` where _a_ is the
anchor line, _b_ is the number of bytes from the start of the line to the
anchor, _c_ is the cursor line (like `%val{cursor_line}`), _d_ is
the number of bytes from the start of the line to the cursor (like
`%val{cursor_column}`), and all are 1-based decimal integers
*%val{selections_desc}*::
_in window scope_ +
unquoted list of the ranges of all selections, in the same format as
`%val{selection_desc}`
*%val{session}*::
name of the current session
*%val{source}*::
_in `.kak` file_ +
path of the file currently getting executed (through the source command)
*%val{text}*::
_in `prompt` command <command> parameter_ +
the text entered by the user in response to the `prompt` command
*%val{timestamp}*::
_in buffer, window scope_ +
timestamp of the current buffer, an integer that increments each time the
buffer is modified, including undoing and redoing previous modifications
(see also `%val{history_id}`)
*%val{user_modes}*::
unquoted list of user modes.
*%val{version}*::
version of the current Kakoune server (git hash or release name)
*%val{window_height}*::
_in window scope_ +
height of the current Kakoune window
*%val{window_width}*::
_in window scope_ +
width of the current Kakoune window
Values in the above list that do not mention a context are available
everywhere.
2016-02-10 22:03:49 +01:00
A value described as a "quoted list" will follow the rules of Kakoune string
quoting (See <<command-parsing#,`:doc command-parsing`>>). An "unquoted list"
cannot contain any special characters that would require quoting.