Recently, switch completion were given the menu behavior.
Unfortunately this breaks cases like
:echo -- -mark<ret>
where the hypothetical user wanted to actually display "-mark", not
"-markup".
Simply bail if there is a double-dash. This is not fully correct,
for example it wrongly disables switch completion on
echo -to-file -- -
but that's minor, we can fix it later.
In future, we should reuse the ParametersParser when computing completions,
which will obsolete this workaround.
So far they have only been talked about in source code
(HistoryRegister), not in documentation.
Let's give them an official name so users can find them better;
"prompt history register" seems better than "history register" since
the former gives more context. OTOH, in future other registers (like @)
could grow into history registers, so I'm not sure.
State that the history registers are only changed by _interactive_
prompts; that's not quite true yet for user modes but I'll push a
separate fix for that.
We often use the pattern «map global normal ": foo"». The space
after the colon is unnecessary since execution of the mapping won't
add to history anyway, since 217dd6a1d (Disable history when executing
maps, 2015-11-10).
With the parent commit, the space is no longer necessary for user
mappings, so there is no reason to continue the cargo-cult.
Remove the space from mappings to set a good example.
Commit 217dd6a1d (Disable history when executing maps, 2015-11-10)
made it so with
map global normal X %{:echo 123<ret>}
X does not add to prompt history (%reg{:}).
Unfortunately this behavior was not extended to mappings in the "user"
keymap, nor to mappings in custom user modes.
In my experience, not adding to history is almost always the expected
behavior for mappings. Most users achieve this by adding a leading space:
map global user X %{: echo 123<ret>}
but that's awkward. We should have good defaults (no nnoremap)
and map should work the same way across all modes.
Fix this by also disabling history when executing user mappings. This
is a breaking change but I think it only breaks hypothetical scenarios.
I found some uses where user mappings add to history but none of them
looks intentional.
f702a641d1/.config/kak/kakrc (L169)604ef1c1c2/kakrc (L96)d22e7d6f68/kak/kakrc (L71)https://grep.app/search?q=map%20%28global%7Cbuffer%7Cwindow%29%20user%20.%2A%5B%21%3A/%5D%5B%5E%20%5D.%2A%3Cret%3E®exp=true
If I use "man dirname" and select "basename"
SEE ALSO
basename(1), readlink(1)
^------^
then pressing <ret> to trigger man-jump selects everything from "ALSO"
until "basename(1)" Obviously that's not the name of a man page,
so it fails. When I select only "asename" it works.
The bad selection happens because we use a combination of <a-?> and ?
to extend the selection to a full link. This is more complicated than
it needs to be; let's just select the surrounding WORD. This works
fine because man page links never start mid-word, and trailing
characters are ignored anyway.
This allows to select completions without pressing Tab.
There are two different obvious ways to add the menu bit.
1. When creating the "Completions" object, pass the
Completions::Flags::Menu parameter.
2. If there is a completer function like "complete_scope", wrap
it, e.g. "menu(complete_scope)".
I have settled on always using 2 if there is a completer function
and 1 otherwise.
The advantage of 2 over 1 is that it allows to use the completer
function in a context where we don't want the menu behavior
(e.g. "complete-command").
---
Now the only* completion type where we usually don't use menu behavior
is file completion. Unfortunately, menu behavior has poor interaction
with directories' trailing slashes. Consider this (contrived) example:
define-command ls -docstring "list directory contents" -params .. %{
echo -- %sh{ls "$@"}
}
complete-command -menu ls file
Run ":ls kakoun<ret>". The prompt expands to ":ls kakoune/"
before executing. Next, run ":<c-p>". This recalls ":ls kakoune/"
and immediately selects the first completion, so on validation,
the command will be ":ls kakoune/colors/", which is weird.
[*] Also, expansions like %val{bufname} also don't use menu
behavior. It wouldn't add value since validation doesn't add a
closing delimiter. I have an experimental patch that adds closing
delimiters automatically but I'm not sure if that's the right
direction.
This makes "cd<space><ret>" change to the first completion,
not to $HOME. This might be surprising but it should make sense.
I don't have a concrete motivation but this should save a Tab press
in some scenarios.
We allow to abbreviate scopes ("set g" means the same thing as "set
global") but that feature is a bit obscure. Users might figure out the
menu completion behavior faster, so let's maybe use it here as well?
Not really attached to this but it enables the next commit to use
menu() for completing scopes.
This refactoring is possible because we always have
params[token_to_complete].length() == pos_in_token
---
Instead of three separate functions, I originally tried to add
template arguments to complete_scope(). That worked fine with g++
12.1 but clang 14.0 complained when wrapping a menu() around a
complete_scope() that relied on defaulted template arguments:
commands.cc:1087:20: error: no matching function for call to 'menu'
make_completer(menu(complete_scope), menu(complete_hooks), complete_nothing,
^~~~
commands.cc:116:6: note: candidate template ignored: couldn't infer template argument 'Completer'
auto menu(Completer completer)
^
On a command prompt like
"set-option -remove buffer aligntab "
we fail to show the aligntab-specific info . Fix this by skipping a
leading -remove, just like we skip -add.
Add an explicit specialization of contains() because otherwise I'd
need to write something like
contains(Array{"-add", "remove"}, param)
This gives the "prompt" command the same "-menu" switch as
"complete-command" and "define-command". I don't think anyone has
asked for it but it seems like a good idea?
Both "define-command" and "prompt" use the same logic, so share
it. This will make it easy to implement "prompt -menu".
This reveals a problem with PromptCompleterAdapter: when converting
it to std::function and then to bool, it always evaluates to true
because it has an operator(). However, it should evaluate to false
if the adaptee holds no valid function (e.g. is a default-constructed
std::function). Otherwise we try to call a non-existant function. Tweak
PromptCompleterAdapter to work for empty inputs.
If I type
:echo -mx
I get no completions, even when I move the cursor on the x.
If I replace the x with a k, I get a completion "-markup".
The odd thing is that if I accept the completion while the cursor is
on the k, then the commandline will be
:echo markupk
Evidently, the characters under cursor (x/k) influence the completion
(actually all letters right of the cursor do), but they are not
incorporated in the final result, which is weird.
I think there are two consistent behaviors:
1. Compute completions only from characters left of the cursor. We already
do this in insert mode completion, and when completing the command name
in a prompt.
2. Compute completions from the whole token, and when accepting a completion,
replace the whole token.
Most readline-style completion systems out there implement 1. A
notable exception is fish's tab-completion. I think we should stick
to 1 because it's more predictable and familiar. Do that.
This allows us to get rid of a special case for completing command
names, because the new behavior subsumes it.
In fact, I think this would allow us to get rid of most "pos_in_token"
or "cursor_pos" completer parameters. I believe the only place where we
it's actually different from the end of the query is in "shell-script"
completers, where we expose "$kak_pos_in_token". I think we can still
remove that parameter and just cut the commandline at the cursor
position before passing it to a "shell-script" completer. Then we
also don't need "$kak_token_to_complete" (but we can still keep
expose them for backwards compatibility).
Just like in the parent commit, this requires us to use a non-owning
type. Technically, these strings all benefit from SSO, so there is
no lifetime issue, but we can't deduce that from the types.
I guess we could use InplaceString just as well.
This means that typing
:add-highlighter g c 80
results in
:add-highlighter global/ column 80
Paths for add-highlighter do not get the menu behavior because we
want to be able to type "global/foo" even if "global/foobar" exists.
complete() merely iterates over its input, so we can pass it a range
instead of a vector. For some reason, this requires specifying the
type of the static array, or else its elements become String which
triggers this assertion:
static_assert(not std::is_same<decltype(*begin(container)), String>::value,
"complete require long lived strings, not temporaries");
Specify the type with an explicit Array<StringView, 8>. This is
pretty ugly but the alternative of appending "_sv" to every single
array element seems worse?
If we modify the vector of user modes while complete() is iterating
over, we could crash -- but that scenario is impossible since both
only happen inside the single-threaded server process.
