fox32rom: Start implementing RYFS support

This commit is contained in:
Ry 2022-04-17 14:38:38 -07:00
parent e7c0caafaf
commit 5df841f061
4 changed files with 136 additions and 3 deletions

View File

@ -1,6 +1,9 @@
; disk booting routines
; these are only used during booting, they are not exposed via the jump table
const KERNEL_FILE_STRUCT: 0x01FFF800 ; kernel.bin file struct is right above the system stack
kernel_file_name: data.str "kernel bin" data.8 0
; read disk 0 and attempt to figure out what type of disk it is, and load the correct binary into memory
; inputs:
; r0: disk size (bytes)
@ -18,13 +21,18 @@ start_boot_process:
mov r3, 0x80003000 ; command to read a sector from disk 0 into memory
mov r4, 0x80002000 ; command to set the location of the buffer
; first, check to see if this is a FAT-formatted disk
; first, check to see if this is a FAT-formatted disk or RYFS-formatted disk
out r4, r2 ; set the memory buffer location
out r3, 0 ; read sector 0 into the buffer
cmp.8 [r2], 0xEB ; check for an x86 jmp instruction, indicating a possible FAT volume
ifz jmp start_boot_process_fat
cmp.8 [r2], 0xE9 ; check for an x86 jmp instruction, indicating a possible FAT volume
ifz jmp start_boot_process_fat
out r3, 1 ; read sector 1 into the buffer
add r2, 2
cmp.16 [r2], 0x5952 ; check for RYFS magic bytes
ifz jmp start_boot_process_ryfs
sub r2, 2
start_boot_process_raw_binary_sector_loop:
out r4, r2 ; set the memory buffer location
out r3, r0 ; read the current sector into memory
@ -33,7 +41,18 @@ start_boot_process_raw_binary_sector_loop:
loop start_boot_process_raw_binary_sector_loop
jmp start_boot_process_done
start_boot_process_fat:
;
jmp start_boot_process_fat
start_boot_process_ryfs:
; open kernel.bin
mov r0, kernel_file_name
mov r1, 0
mov r2, KERNEL_FILE_STRUCT
mov r3, TEMP_SECTOR_BUF
call ryfs_open
mov r0, KERNEL_FILE_STRUCT
mov r1, 0x00000800
call ryfs_read_whole_file
start_boot_process_done:
; done loading !!!
; now clean up and jump to the loaded binary
@ -53,4 +72,4 @@ boot_cleanup:
; disable the menu bar
call disable_menu_bar
ret
ret

View File

@ -1,5 +1,7 @@
; disk routines
const TEMP_SECTOR_BUF: 0x01FFF808
; read a sector into the specified memory buffer
; inputs:
; r0: sector number

View File

@ -152,6 +152,7 @@ get_rom_version:
#include "mouse.asm"
#include "overlay.asm"
#include "panic.asm"
#include "ryfs.asm"
#include "vsync.asm"

111
ryfs.asm Normal file
View File

@ -0,0 +1,111 @@
; RYFS routines
; open a file from a RYFS-formatted disk
; inputs:
; r0: pointer to file name string (8.3 format, for example "test txt" for test.txt)
; r1: disk ID
; r2: file struct: pointer to a blank 8 byte file struct as described below
; r3: pointer to sector buffer
; outputs:
; r0: first file sector
;
; file struct:
; file_disk: 1 byte
; file_first_sector: 2 bytes
; file_seek_offset: 4 bytes
; file_reserved: 1 byte
ryfs_open:
push r1
push r2
push r10
; r10: pointer to file struct entry
mov r10, r2
mov.8 [r10], r1 ; write file_disk
inc r10
push r0
mov r0, 1
mov r2, r3
call read_sector
pop r0
; point to the file name of the first directory entry
mov r1, r3
add r1, 20
mov r2, 11 ; compare 11 bytes
ryfs_open_find_dir_entry_loop:
call compare_memory_bytes
ifz jmp ryfs_open_found_dir_entry
add r1, 16 ; point to the file name in the next directory entry
jmp ryfs_open_find_dir_entry_loop ; FIXME: this never returns if the file wasn't found
ryfs_open_found_dir_entry:
sub r1, 4 ; point to first sector of this file
mov.16 [r10], [r1] ; write file_first_sector
add r10, 2
mov [r10], 0 ; write file_seek_offset
inc r10
mov.8 [r10], 0 ; write file_reserved
movz.16 r0, [r1]
pop r10
pop r2
pop r1
ret
; read a whole file into the specified buffer
; FIXME: this will always load a multiple of 506 bytes, even if the file is smaller
; inputs:
; r0: pointer to file struct
; r1: pointer to destination buffer
; outputs:
; none
;
; file struct:
; file_disk: 1 byte
; file_first_sector: 2 bytes
; file_seek_offset: 4 bytes
; file_reserved: 1 byte
ryfs_read_whole_file:
push r0
push r1
push r2
push r10
push r11
mov r10, r0
mov r11, r1
; read the first sector into the temp buffer
movz.8 r1, [r0] ; file_disk
inc r0
movz.16 r0, [r0] ; file_first_sector
ryfs_read_whole_file_sector_loop:
mov r2, TEMP_SECTOR_BUF
call read_sector
; copy the sector data to the destination buffer
mov r0, TEMP_SECTOR_BUF
add r0, 6
mov r1, r11
mov r2, 506
call copy_memory_bytes
; check to see if this is the last sector
; FIXME: if this is the last sector, it should respect the sector size field in the header
sub r0, 4
cmp.16 [r0], 0
ifz jmp ryfs_read_whole_file_last_sector
; there are more sectors left, load them
movz.16 r0, [r0] ; sector number
mov r1, [r10] ; file_disk
add r11, 506
jmp ryfs_read_whole_file_sector_loop
ryfs_read_whole_file_last_sector:
pop r11
pop r10
pop r2
pop r1
pop r0
ret